Thursday, September 19, 2019

New VM cleanup

When creating a new VM in vSphere, you get a number of virtual devices & settings by default that you probably don't have any interest in keeping:

  • Floppy drive (depending on version & type of client in use)
  • Floppy adapter
  • IDE ports
  • Serial ports
  • Parallel ports
Given that some of these are redundant (why keep the IDE adapter when you're using SATA for the optical device?) while others are polled I/O in Windows (OS must keep checking to see if there's activity on the port, even if there will never be any), it just makes things more streamlined if you cleanup these settings when creating a new VM...then using the cleaned-up VM as a template for creating new VMs later on.

Step 1: create a new VM
Step 2: Set VM name and select a location
Step 3: Select a compute resource
Step 4: Select storage
Step 5: Set compatibility no higher than your oldest version of ESXi that the template could be deployed on.
Step 6: Select the guest OS you'll install
Step 7a: Customize hardware: CPU, Memory, Hard Drive
Step 7b: Attach NIC to a general-purpose or remediation network port
Step 7c: Don't forget to change the NIC type! If you don't the only way to change it later is to remove & re-add the correct type, which will also change the MAC address and, depending on the order you do the modifications, could put the new virtual NIC into a different virtual PCIe slot on the VM hardware, upsetting other configurations in the guest (like static IP addresses).
Step 7d: Jump to the Options tab and set "Force BIOS setup"
Step 8: Finish creating the VM
Step 9: Open remote console for VM
Step 10: Power On the VM. IT should pause at the BIOS editor screen.
Step 11: On the Advanced page, set Local Bus IDE to "Disabled" if using SATA; set it to "Secondary" if using IDE CD-ROM (Even better: Change the CD-ROM device to IDE 0:0 and set it to "Primary").
Step 12: Descend into the "I/O Device Configuration" sub-page; by default, it'll look like the screenshot below:
Step 13: Using the arrow keys & space bar, set each device to "Disabled", then [Esc] to return to the Advanced menu.
Step 14: Switch to the Boot page. By default, removable devices are first in the boot order.
Step 15: Use the minus [-] key to lower the priority of removable devices. This won't hurt the initial OS setup, even on setup ISOs that normally require a key-press to boot off optical/ISO media: the new VM's hard drive has no partition table or MBR, so it'll be skipped as a boot device even when it's first. Once the OS is installed, you'll never have to worry about a removable media causing a reboot to stall.
Step 16: Press [F10] to save the BIOS config, then use the console to attach to an ISO (local or on a datastore) before exiting the BIOS setup page.

Step 17: Install the guest OS, then add VMware Tools. Perform any additional customization—e.g., patching, updates, and generalization—then convert the new VM to a template.

You're set! No more useless devices in your guest that take cycles from the OS or hypervisor.

Additional Note on modifying existing VMs:
Aside from the need to power down existing VMs that you might want to clean up with this same procedure, the only issue I've run into after doing the device + BIOS cleanup is making sure I get the right combination of IDE channels & IDE CD-ROM attachment. The number of times I've set "Primary" in BIOS but forgot to change the CD-ROM to IDE 0:0 is ... significant.

Additional Note on Floppy Drives:
Floppy drive handling is a special case, and will very much depend on which version of vSphere—and therefore, the management client—you're using. If you have the "Flex" client (or are still using v6.0 and have the C# client), the new VM will have a floppy disk device added by default. Naturally, you want to remove it as part of your Hardware Customization step during new VM deployment.
If you're happily using the HTML5 Web Client, you may find that the floppy is neither present, nor manageable (for adding/removing or attaching media)... This is the 0.1% of feature parity that I still find lacking in the H5 client. Hopefully, it'll get added, if for no better reason than to allow an admin to remove floppy devices that are still part of VMs that were created in older versions.


  1. Thank you for your analysis.
    Looking forward to reading more of your posts.
    I hope to give something back and help others like you aided me

    Watch No Time to Die Online Free

  2. Thank you for your analysis.
    Looking forward to reading more of your posts.
    I hope to give something back and help others like you aided me

    Watch F9 Online Free

  3. Thank you for your analysis.
    Looking forward to reading more of your posts.
    I hope to give something back and help others like you aided me
    Watch UFC Online Free

  4. Wellington cars aim is to provide 1st class taxi service for all our customers taking them to their destination efficiently and safely.We have an outstanding reputation for providing taxi service in Wokingham and its surroundings. All our drivers are fully licensed through Wokingham Borough council and CRB checked previously known as DBS through thames valley police.We are happy to say we have a reputation of safety, punctuality, professionalism, respectful

  5. Great article, It's very informative. Thanks for the share. Free Pie Has a great article, check it out here

  6. Hello I really impressed from your article.You article is very usefull.
    wordpress tutorialan other issues
    you find out here. fix wordpress problems

  7. Kellogg Movers offers a professional moving service that you deserve. We are the best call you can make, and we will prove it.

    In House Moving Service
    Full Service Moving Company
    Relocation Services

  8. The kart racing sensation enjoyed by over 300M players worldwide is back and better than ever with more style, more game modes, more thrill! Race with friends or just play it solo through a variety of gameplay modes. Collect and upgrade iconic characters and karts from the KartRider universe. Climb the leaderboard ranks and become the ultimate racing legend!
    kartrider rush plus hack